|
Technical Specifications
|
| Hardware |
RF: 2.4 GHz Frequency Band
Standard: IEEE 802.11b/g/n
IEEE 802.11b/g: 2.400~2.484 GHz
Data Rate: Up to 300 Mbps
Memory: 32MB
Flash Memory: 4MB |
| Antenna |
Two (2) Internal 4 dBi Omni-Directional Antennas |
| Physical Interface |
1 x RJ-45 Fast Ethernet (10/100 Mbps)
1 x Reset Button
Power Jack |
| LEDs Status |
Power
LAN (10/100 Mbps)
WLAN (Wireless Connection) |
| Power Requirements |
Power Supply: 90 to 240 VDC ± 10%, 50/60 Hz
(depends on different countries)
Active Ethernet (Power-over-Ethernet, IEEE 802.3af)
Power Adapter (United States) 48VDC/0.375A
Device: 12V/1A |
| Modulations |
OFDM: BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, DQPSK, CCK |
| Operating Channels |
2.4 GHz: US/Canada 1-11 |
| Receiver Sensitivity |
802.11b (2.412~2.472 GHz) 1 Mbps @ -93 dBm
802.11b (2.412~2.472 GHz) 11 Mbps @ -89 dBm
802.11g (2.412~2.472 GHz) 6 Mbps @ -92 dBm
802.11g (2.412~2.472 GHz) 54 Mbps @ -72 dBm
802.11n (2.412~2.472 GHz) MCS8 @ -90 dBm
802.11n (2.412~2.472 GHz) MCS15 @ -70 dBm |
| Available Transmit Power |
802.11b (2.412~2.472 GHz)
17.5 dBm @ 1~11 Mbps |
802.11g/n (2.412~2.472 GHz)
18 dBm @ 6~9 Mbps /MCS9
16 dBm @ 12~18 Mbps /MCS11
14 dBm @ 24~36 Mbps / MCS13
13 dBm @ 48~54 Mbps / MCS15 |
|
|
|
Software
|
| Topology |
Infrastructure/Ad-Hoc |
| Operation Modes |
Access Point, WDS Bridge, Universal Repeater
|
| Multiple BSSID |
Supports up to 8 BSSIDs per radio |
| LAN |
IP (check validity and DHCP server IP range) |
| DHCP Server |
DHCP range, lease time, client list |
| SSID-to-VLAN Tagging |
Supports 802.1q SSID-to-VLAN tagging |
| Spanning Tree |
Supports 802.1d Spanning Tree Protocol |
| Wireless |
Wireless Mode: 11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
Transmission rate:
2.4 GHz: 11n only, 11b/g/n mix, 11b only, 11b/g, 11g only |
| QoS |
WMM (Wireless Multimedia) |
| VPN |
Pass-through (PPTP, L2TP, IPSec) |
| WPS |
Software only |
|
Management
|
| Tx Power Control |
Adjust transmit power by dBm |
| Configuration |
Web-based configuration (http)/Telnet |
| Telnet Server |
CLI |
| Firmware Upgrade |
Via web browser, settings are reserved after upgrade |
| Administrator Setting |
Administrator Username and Password Change |
| Reset Setting |
Reboot (press 1 second).
Reset to factory default (press 10 seconds) |
| System Monitoring |
Status Statistic and Event Log |
| SNMP |
V1, V2c |
| MIB |
MIB I, MIB II (RFC1213) and private MIB |
| Traffic Measurement |
Per interface |
| Auto-channel Selection |
Automatically selecting least congested channel |
| Bandwidth Measurement |
IP range and bandwidth management |
| Backup and Restore |
Save and restore settings through Web interface |
| Diagnosis |
IP pinging statistics |
| Wireless / Network |
PPPoE: Point-to-Point Protocol over Ethernet in Client Router mode
(this function will keep trying when failed or disconnected)
PPTP: Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks |
| Wireless Security |
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 field
L2 Isolation (Access Point mode)
Wireless STA (Client) connected list (Idle/Connection Time, Pkt statistics) |
| Environmental & Physical |
| Temperature Range |
Operating: 0 to 50ºC (32º to 122ºF)
Storage: -20ºC to 60ºC (-4Fº to 140ºF) |
| Humidity (non-condensing) |
Operating: 90% or less
Storage: 90% or less |
| Certifications |
FCC, IC |
| Dimensions & Weights |
| EAP9550 Device |
Weight: 0.62 lbs.
Diameter: 4.73”
Height” 2.17” |
| Package Contents |
EAP9550 N300 Indoor Access Point
12V/1A Power Adapter
T-Rail Mounting Kit
Ceiling Mount and Wall Screw Kit
Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide
CD with User Manual |
| Warranty |
1 Year |
Kinh doanh 1
